Back to silicone oil products

SOFT AND SMOOTH HYDROPHILIC SILICONE OIL FOR COTTON

WF-6513N

Soft and smooth hydrophilic silicone oil for cotton

For soft, smooth and hydrophilic finishing of cotton, rayon and Tencel fabrics.

Inquire / Request a sampleTDS / SDS

Features

  • Imparts a soft, smooth and silky handle.
  • Good hydrophilicity.
  • Special molecular structure helps prevent roller sticking, silicone spots and oil floating.
  • Resists some alkali, electrolytes and anions; compatible with nonionic and cationic auxiliaries.

Specifications

WF-6513N
PropertyValue
Main componentSpecial block organosilicon polymers
AppearanceLight yellow liquid
Solid content (%)78-81
pH (1% aqueous solution)7.0-8.0
Ionic characterWeakly cationic / nonionic

Applications

For soft, smooth and hydrophilic finishing of cotton, rayon and Tencel fabrics.

Directions

Emulsification

Mix neat oil and water at approximately 1:2, adjusting for the required concentration. Use cold water, or warm to around 30°C if available. Add neat oil and 3% acetic acid, then gradually add water in portions of 0.1, 0.2, 0.3, 0.4 and 0.5 parts, stirring for 15-20 minutes per addition. Stop and filter when a blue transparent emulsion forms.

Exhaustion

Emulsion dosage: 0.4-1.5% (o.w.f.); room temperature for 10-20 minutes. Hydroextract, then dry at 100°C or heat-set at 170-200°C.

Padding

Emulsion dosage: 10-30 g/L; one dip, one nip, followed by heat setting.

Adjust the process and dosage based on actual fabric trials.

Packaging & storage

Packaging
120 kg plastic drums, or other packaging on request
Storage conditions
Keep sealed and protected from light

TDS / SDS

SDS

Safety Data Sheet: handling, protection and transport information.

Request document