棉机织布
WF-7126A:60–100 g/L。一浸一轧(带液率 50–90%)→ 烘干 110°C → 定型 150–170°C × 90–180 秒。
| 项目 | 指标 |
|---|---|
| 主要成分 | 聚氨酯分散液 |
| 外观 | 乳白色液体 |
| pH 值(1% 水溶液) | 3.5–6.0 |
| 离子性 | 弱阳 |
| 含固量(%) | 26.0 |
| 溶解性 | 易溶于水 |
适用于天然纤维、合成纤维及其混纺织物的浸轧法防水整理。
WF-7126A:60–100 g/L。一浸一轧(带液率 50–90%)→ 烘干 110°C → 定型 150–170°C × 90–180 秒。
WF-7126A:40–100 g/L。一浸一轧(带液率 40–70%)→ 烘干 110°C → 定型 170–190°C × 30–90 秒。
用醋酸或柠檬酸调整工作液 pH 至 3.0–5.0;轧液尽量保持室温,化料时低速搅拌。低于 4°C 可能破乳。
整理前去除织物上附着的染料、表面活性剂等加工助剂。与树脂、柔软剂等同浴使用前,须做相容性试验,以免影响防水效果和工作液稳定性。
具体工艺请根据实际试样情况调整。
FLUORINE-FREE FINISHING AGENT
Fluorine-free finishing agent
For water-repellent finishing of natural fibres, synthetic fibres and blended woven fabrics.
| Property | Value |
|---|---|
| Main component | Polyurethane dispersion |
| Appearance | Milky white liquid |
| Solid content (%) | 26.0 |
| pH (1% aqueous solution) | 3.5-6.0 |
| Ionic character | Weakly cationic |
For water-repellent finishing of natural fibres, synthetic fibres and blended woven fabrics.
Dosage: 60-100 g/L; one dip, one nip; wet pickup 50-90%. Dry at 110°C, then heat-set at 150-170°C for 90-180 seconds.
Dosage: 40-100 g/L; one dip, one nip; wet pickup 40-70%. Dry at 110°C, then heat-set at 170-190°C for 30-90 seconds.
Adjust bath pH to 3.0-5.0 with acetic or citric acid. Keep the bath near room temperature and stir slowly. Emulsion instability may occur below 4°C. Clean fabrics thoroughly and check compatibility before combining with other auxiliaries.
Adjust the process and dosage based on actual fabric trials.
Technical Data Sheet: specifications, features, applications and directions.
Safety Data Sheet: handling, protection and transport information.
Request document