乳化工艺
按原油的 0.5% 加冰醋酸,加乳化剂,按 1 开 3 的水比例边搅拌边加水乳化。
| 项目 | 指标 |
|---|---|
| 主要成分 | 嵌段有机硅 |
| 外观 | 浅褐色粘稠液体 |
| 含固量(%) | 81.0–84.0 |
| 离子性 | 弱阳/非 |
适用于棉、人棉、涤棉及其混纺织物的松软亲水整理。
按原油的 0.5% 加冰醋酸,加乳化剂,按 1 开 3 的水比例边搅拌边加水乳化。
乳液用量:0.4–1.5%(o.w.f.)。室温下浸渍约 10–20 分钟,然后脱水,100℃ 烘干或 170–200℃ 定型。
乳液用量:5–15 g/L。一浸一轧 → 定型。
详细工艺请通过实际试样酌情调整;乳化比例和乳化剂用量请联系技术人员确认。
HYDROPHILIC FINISHING AGENT WITH SUPERIOR HANDLE
Hydrophilic finishing agent with superior handle
For soft and hydrophilic finishing of cotton, polyester/cotton and their blends.
| Property | Value |
|---|---|
| Main component | Block silicone oil |
| Appearance | Light brown viscous liquid |
| Solid content (%) | 81-84 |
| pH (1% aqueous solution) | 4.0-6.0 |
| Ionic character | Weakly cationic / nonionic |
For soft and hydrophilic finishing of cotton, polyester/cotton and their blends.
Add acetic acid at 0.5% of the neat oil and add emulsifier. The TDS specifies a 1:3 water ratio; emulsify while stirring and gradually adding water.
Emulsion dosage: 0.4-1.5% (o.w.f.); room temperature for 10-20 minutes. Hydroextract, then dry at 100°C or heat-set at 170-200°C.
Emulsion dosage: 5-15 g/L; one dip, one nip, followed by heat setting.
Adjust the process and dosage based on actual fabric trials.
Technical Data Sheet: specifications, features, applications and directions.
Safety Data Sheet: handling, protection and transport information.
Request document