开稀乳化
按原油:水约 1:3 化料,加入原油量 2.5–3% 的冰醋酸。冷水化料气温低时可适当升温至约 35–40°C。先放原油加冰醋酸,也可加溶剂或乳化剂乳化;搅拌下按 0.1、0.2、0.3、0.4、0.5 份水依次加入,每次半小时,完成后停止搅拌、过滤出料。自乳化乳液呈乳白色;加溶剂或乳化剂所得乳液呈蓝光透明液体。
| 项目 | 指标 |
|---|---|
| 主要成分 | 嵌段有机硅聚合物 |
| 外观 | 淡黄粘稠液体 |
| pH 值 | 7.0–8.0 |
| 离子性 | 阳/非 |
| 含固量 | 76.0–80.0 |
| 溶解性 | 不易溶于水 |
适用于棉、涤棉混纺、涤腈及涤纶织物的蓬松整理。
按原油:水约 1:3 化料,加入原油量 2.5–3% 的冰醋酸。冷水化料气温低时可适当升温至约 35–40°C。先放原油加冰醋酸,也可加溶剂或乳化剂乳化;搅拌下按 0.1、0.2、0.3、0.4、0.5 份水依次加入,每次半小时,完成后停止搅拌、过滤出料。自乳化乳液呈乳白色;加溶剂或乳化剂所得乳液呈蓝光透明液体。
原油 1 开 4 乳液,用量 10–30 g/L,定型。
原油 1 开 4 乳液,用量 1.0–3.0%(o.w.f.),时间 20–30 分钟,脱水,100–130°C 烘干。
具体工艺请根据实际试样情况调整。
FLUFFY FINISHING AGENT
Fluffy finishing agent
For fluffy finishing of cotton, polyester/cotton blends, polyester/acrylic blends and polyester fabrics.
| Property | Value |
|---|---|
| Main component | Segmented organosilicon polymers |
| Appearance | Colourless to pale yellow transparent liquid |
| Solid content (%) | 76-80 |
| pH (1% aqueous solution) | 7.0-8.0 |
| Ionic character | Cationic / nonionic |
For fluffy finishing of cotton, polyester/cotton blends, polyester/acrylic blends and polyester fabrics.
Mix neat oil and water at approximately 1:3. Add acetic acid at 2.5-3% of the oil; use cold water, or warm to 35-40°C when needed. Add water in portions of 0.1, 0.2, 0.3, 0.4 and 0.5 parts, stirring for 30 minutes per addition, then filter. Solvent or emulsifier may be used as described in the TDS.
Use a 1:4 diluted emulsion at 10-30 g/L, then heat-set.
Use a 1:4 diluted emulsion at 1.0-3.0% (o.w.f.) for 20-30 minutes. Hydroextract and dry at 100-130°C.
Adjust the process and dosage based on actual fabric trials.
Technical Data Sheet: specifications, features, applications and directions.
Safety Data Sheet: handling, protection and transport information.
Request document