冷水化料
原油与乳化剂按 4:1 混合,混合物与水按 1:1 乳化(可根据含量需求调整)。冰醋酸按原油量的 3% 加入,搅拌 10 分钟,再分 6 次边搅拌边加水,每次搅拌 15 分钟。得到乳白乳液后停止搅拌、过滤出料。
| 项目 | 指标 |
|---|---|
| 主要成分 | 聚醚改性嵌段硅油 |
| 外观 | 淡黄色液体 |
| pH 值 | 7.0–8.0 |
| 离子性 | 弱阳 |
| 含固量(%) | 67–70 |
| 溶解性 | 原油不溶于水 |
适用于涤锦提花、混纺提花、锦纶、腈纶、涤、棉及各种毛类织物。
原油与乳化剂按 4:1 混合,混合物与水按 1:1 乳化(可根据含量需求调整)。冰醋酸按原油量的 3% 加入,搅拌 10 分钟,再分 6 次边搅拌边加水,每次搅拌 15 分钟。得到乳白乳液后停止搅拌、过滤出料。
乳液用量 1–1.5%(o.w.f.),室温浸渍约 20–30 分钟,然后脱水、烘干或定型。
乳液用量 10–15 g/L,一浸一轧或二浸二轧,然后烘干或定型。
具体工艺请根据实际试样情况调整。
FINE AND SMOOTH FINISHING AGENT
Fine and smooth finishing agent
For jacquard fabrics, nylon, acrylic, polyester, cotton and woollen fabrics.
| Property | Value |
|---|---|
| Main component | Polyether-modified block silicone oil |
| Appearance | Colourless to pale yellow transparent liquid |
| Solid content (%) | 68.0-70.0 |
| pH (1% aqueous solution) | 7.0-8.0 |
| Ionic character | Cationic |
For jacquard fabrics, nylon, acrylic, polyester, cotton and woollen fabrics.
Mix neat oil and water at approximately 1:2; emulsifier and acetic acid are required. Use cold water. Add water in five portions while stirring for 15 minutes per addition, then stop and filter when a transparent emulsion forms.
Dosage: 1-1.5% (o.w.f.); room temperature for 20-30 minutes. Hydroextract, then dry or heat-set.
Dosage: 10-15 g/L; one dip, one nip or two dips, two nips; dry or heat-set.
Adjust the process and dosage based on actual fabric trials.
Technical Data Sheet: specifications, features, applications and directions.
Safety Data Sheet: handling, protection and transport information.
Request document